起重電磁鐵廠家
您當前的位置 : 首 頁 > 產品中心 > 起重電磁鐵
起重電磁鐵

起重電磁鐵

  • 所屬分類:起重電磁鐵
  • 瀏覽次數:
  • 發布日期:2019-12-13
  • 產品概述
  • 性能特點
  • 技術參數

起重電磁鐵用 途Applications:  

  1、用于冶金、礦山、機械、交通運輸等行業吊運鋼鐵等導磁性材料?! ?/span>

  2、用作電磁機械手,夾持鋼鐵等導磁性材料?! ?/span>

  1.Applied to lifting and transporting magnet -conductive materials such as steels and irons in metallurgy industry,mine industry,machinery industry,and elc.  

  2.Used as electromagnetic manipulator to hold magnet –conductive materials as steels and irons.  

起重電磁鐵

起重電磁鐵

主要特點Main Features:  

  1、采用全密封結構,防潮性能好?! ?/span>

  2、經計算機優化設計,結構合理、自重輕、吸力大、能耗低?! ?/span>

  3、勵磁線圈經特殊工藝處理,提高了線圈的電氣和機械性能,絕緣材料耐熱等級達到C級,使用壽命長?! ?/span>

  4、針對不同的被吸物狀況采用不同的結構和參數,能廣泛滿足用戶需求?! ?/span>

  5、超高溫型電磁鐵采用獨特隔熱方式,其被吸物溫度由過去的600℃提高到700℃,擴展了電磁鐵的適用范圍?! ?/span>

  6、安裝、運行、維護簡便?! ?/span>

  1.Rugged-all-welded construction with good moisture-proofing.  

  2.Mjorized design by computer with reasonable stucture,light dead  weight,strong attraction force and low energy consumption.

  3.The energizing coils are processed by special technology to improve  the electrical property and mechanical property of the energizing  coils.Heat-resistant grade of insulating material reaches Grade C  with long service life.  

  4.Various structures and technical data are available based on the attached items under different conditions to satisfy the wide demands from the clients.  

  5.Ultra-high temperature type electromagnet adopts unique method of heat-protection,the temperature of the attached materials is increased from 600℃ in the past to 700℃,which expands application range of the electromagnet.  

  6.Simple and convenient installation,operation and maintenance.  

選型注意事項Notes on Model Selection:  

  1、吸運物料溫度低于100℃時,請選用常溫型;超過100℃時,請選用高溫型;超過600℃時,請選用超高溫型?! ?/span>

  2、通電持續率超過60%時,請選用高頻型?! ?/span>

  3、水中吸吊物料時,請選用潛水型(潛水深度≤100m)。潛水型電磁鐵其參數與常溫型相同,因此樣本中未列出。如用戶需潛水型,請在訂貨時說明?! ?/span>

  4、周圍環境溫度:常溫型-5℃~40℃,高溫型-5℃~80℃。海拔高度不超過2000m?! ?/span>

  5、設備配套:單臺使用時,按消耗功率(電流)選擇整流控制設備及輔助設備;多臺聯用時,按聯用臺數的消耗功率(電流)之和選擇?! ?/span>

  1.If temperature of the attached material is below 100℃,please choose nomal temperature type.lf it is above 100℃,please choose high temperature type.lf it is above 600℃,please choose ultra-high temperature type.

  2.When power-on sustaining rate is above 60%,please choose high freguency type.  

  3.When lifting and transporting materials are in water,please choose diving tope fdepth of diving s 100m).The technical data of diving type electromagnet is the same as that of normal temperature type,so it is not listed in cutalogue.lf customers ned diving type, please state clearly when ordering.  

  4.Environment temperature:normal temperature type-5℃~40℃,high temperature type-55℃~80℃.Height above sealevel is no more than 2,000m.  

  5.Corolary equipment:when using single unit,choose commutation control equipment and its neccessory equipment according to consumed power(current);when using combination of several units,choose it according to the sum of the consumed power (current)of the combined units.

標簽

上一篇:起重電磁鐵2019-12-23

Z近瀏覽:

岳陽通力電磁設備有限公司

a1.png手機:18607302570 (唐先生)
a2.png手機:13973065184 (唐先生)
a3.png網址:www.eazybeatz.com
a4.png地址:岳陽市岳陽樓區奇家嶺辦事處奇家社區廖家組004幢

起重電磁鐵廠家

掃一掃,關注我們
18禁美女裸体爆乳无遮挡网站-成 人 黄 色 网站在线播放-国产精品国产三级国产专i-国模叶桐尿喷337P人体